How to Hack wifi using android

how to hack wifi using android

Hacking wifi using Android is cool, ain’t it! Turning your ordinary smartphone to a hacker device, so here I list out top methods to Hack Wifi Using Android

Hacking WEP Routers

  1.  Root a compatible device.Not every Android phone or tablet will be able to crack a WPS PIN. The device must have a Broadcom bcm4329 or bcm4330 wireless chipset and must be rooted. The Cyanogen ROM will provide the best chance of success. Some of the known supported devices include:*.Nexus 7

    *.Galaxy S1/S2

    *.Nexus One

    *.Desire HD

  2. Download and install bcmon.This tool enables Monitor Mode on your Broadcom chipset, which is essential for being able to crack the PIN. The bcmon APK file is available for free from the bcmonpage on the Google Code website.*.To install an APK file, you will need to allow installation from unknown sources in your Security menu. S
  3. Run bcmon.After installing the APK file, run the app. If prompted, install the firmware and tools. Tap the “Enable Monitor Mode” option. If the app crashes, open it and try again. If it fails for the third time, your device is most likely not supported.*.Your device must be rooted to run bcmon


  4. Tap “Run bcmon terminal.”This will launch a terminal similar to most Linux terminals.Type airodumpngand tap the Enter button. AIrdump will load, and you will be taken to the command prompt again. Type airodump-ng wlan0 and tap the Enter button.
  5. Note the MAC address that appears.This is the MAC address of the router. Make sure that you have the right one if there are multiple routers listed. Jot this MAC address down.*.Also, note the Channel that the access point is broadcasting on.
  6. Start scanning the channel.You will need to collect information from the access point for several hours before you can attempt to crack the password. Typeairodump-ng -cchannel#–bssidMAC address-w output ath0and tap Enter. Airodump will begin scanning. You can leave the device for a while as it scans for information. Be sure to plug it in if you are running low on battery.*.Keep scanning until you reach at least 20,000-30,000 packets.
  7. Crack the password.Once you have a suitable number of packets, you can start attempting to crack the password. Return to the terminal and typeaircrack

    -ng output*.cap and tap Enter.

  8. Note the hexadecimal password when finished.After the cracking process is complete (which could take several hours), the messageKEY FOUND!will appear, followed by the key in the hexadecimal form. Make sure that “Probability” is 100% or the core will not work. [2]*.When you enter the key, enter it without the


    ” For example, if the key were 12:34:56:78:90, you would enter1234567890.

Download Wifi master key for pc

 Using Osmino Wi-Fi

1.Open Google Play.

Osmino can be downloaded for free from the Play Store. This app will scan the available access points and let you connect to ones that have had their passwords shared. This app doesn’t do any hacking, but you can benefit from passwords that have been hacked by someone else. See this guide for more detailed instructions for installing apps.
*.Search “Osmino Free Wi-Fi” and install the first search result.
2.Find out all the available networks in your location.This application will track down all the nearby Wi-Fi hotspots, and will also tell you whether or not you can connect with that network.
3.Select a Wi-Fi network.You will see that some Wi-Fi Networks are displayed with either green or red icons. Select one whose icon is green. The one which is shown in green will be either the “Free Open Network” or the one which password has been made available to them. The developer has created a community through which users can provide passwords to each other.

You can downlaod WifiKill from here WiFikill For Pc

*.Beware of  joining password-protected networks without permission, as this can be illegal

Leave a Reply

Your email address will not be published. Required fields are marked *