Root Samsung Galaxy S4

Root Samsung Galaxy S4 (ON PUBLIC DEMAND)
The international LTE variant of the Samsung (KRX:005935) Galaxy S4 with the model number GT-I9505 recently received the latest Android 4.4.2 KitKat firmware update. Users who have already updated their Galaxy S4 handsets to the new I9505XXUFNA1 build can now root their devices, which will allow them to install custom ROMs whenever they are available.

Android hacker Chainfire has come up with an Auto-Root package complete with a SuperSU fix, which addresses the issues that some users had reported with the leaked KitKat firmware build for the Galaxy S4. Here is how to use the Auto-Root package to gain root access on the Galaxy S4 GT-I9505.

Rooting a device allows users to have complete access to the device’s hardware resources and push the limitations that come with the stock firmware. Users should note that rooting the Galaxy S4 LTE GT-I9505 on Android 4.4.2 KitKat XXUFNA1 will void the device’s warranty. But, users can reclaim the warranty by re-installing the official firmware update again.

Vital Points To Remember

– The tutorial is only for the Galaxy S4 GT-I9505 (Qualcomm Snapdragon Quad-Core CPU with LTE).

– Users are recommended to back-up all data before rooting the device.

– The device should have at least an 80 percent charge left on the battery.

– USB drivers must be installed in the computer with USB Debugging enabled on the device to transfer files between the phone and the PC.

Note: International Business Times cannot be held responsible for anything that goes wrong. Users should proceed at their own risk.


Step 1: Download both CF-Auto-Root Android 4.4.2 Package and ODIN3, and extract the files to the computer.!ZpYwTTKQ!nZJy2vsi6k48GKc_IA78fGpo78k_j0YbFI21NYj6eo8
Step 2: Power off the handset and put it in Download mode by pressing and holding down the Volume Down, Home and Power buttons together. After a warning screen appears, press the Volume Up button to enter Download mode.

Step 3: Run Odin3 v3.09.exe as an Administrator while the phone is Download mode, and connect the Galaxy S4 to the PC via USB cable. If connected successfully, a message showing “Added!!” will appear in Odin’s message box.

Step 4: Now, click on the AP button, and select the CF-Auto-Root file that was extracted in Step 1.

Step 5: In Odin, check the “Auto Reboot” and “F. Reset Time” options.

Step 6: Click on the Start button in Odin to begin the flashing process.

Step 7: Once the process is complete, the Galaxy S4 will restart and a PASS message with green background will appear in the left-most box at the top of Odin.

You can now unplug the USB cable to disconnect the handset from PC
Dance a little to prove that your happy 

Leave a Reply

Your email address will not be published. Required fields are marked *